深圳市泰联宏电子有限公司  

加关注0

OZT-SH-124LM1，OZT-SS-124LM1，OZT-SH-112LM1，OZT-SS-148LM1，OZT-SH-148LM1
OZT-SS-112LM1,200
TE 内部编号： 3-1440002-6
触点额定电流 = 16 A
端子类型 = PCB-THT
触点组合形式 = 1 Form A (NO)
Contact - Current Class 10A to 20A Class, Greater Than 16A
触点额定电流 (A) 16
Contact - Limiting Continuous Current (A) 16
Contact - Limiting Making Current (A) 16
Contact - Limiting Breaking Current (A) 16
Insulation - Initial Dielectric Between Coil/Contact Class >4000V Class
Insulation - Initial Dielectric Between Open Contacts (V rms) 1000
介电强度 － 线圈接触体 (V rms) 5000
Contact - Rated Voltage (VAC) 240
Contact - Switching Voltage Max. (VAC) 240
Contact - Switching Voltage Max. (VDC) 24
Contact - Limiting Short-Time Current (A) 16
Contact - Switching Recommended Load, Min. 100mA at 5V
线圈电压 (VDC) 12
线圈电阻 (Ω) 270
额定线圈功率 (mW) 540
Coil - Rated Power Class 500mW to 600mW Class
Insulation - Initial Insulation Resistance (MΩ) 1000000
Insulation - Creepage Class 5.5mm to 8mm Class
Insulation - Clearance Class 5mm to 8mm Class
FCC 68 绝缘认证 10000V Initial Surge Withstand Voltage between Contacts and Coil
尺寸
Mechanical - Length Class 25mm to 30mm Class
长度 (mm [in]) 29.21 [1.150]
Mechanical - Width Class 12mm to 16mm Class
宽度 (mm [in]) 12.80 [0.504]
Mechanical - Height Class 20mm to 25mm Class
高度 (mm [in]) 20.60 [0.811]

ontact Material AgSnO
Contact - Number of Poles 1

触点组合形式 1 Form A (NO)
线圈励磁系统 Monostable, DC
Coil - Special Features Sensitive Version, UL Coil Insulation Class A
行业标准
符合RoHS/ELV标准 符合RoHS标准, 符合ELV 标准
无铅焊接制程 波峰焊最高可达260°C, 波峰焊最高可达240°C, 波峰焊最高可达265°C
RoHS/ELV 符合记录 改为符合 RoHS 指令
Approved/Registered Standards CSA, TUEV, VDE, CQC
环境
Environmental - Category of Protection RTIII
Environmental - Ambient Temperature, Max. (°C [°F]) 70 [158]
Environmental - Ambient Temperature Class 50°C to 70°C Class